3
4
Getting Started
Download Safety 1st App
Download the
Safety 1st Connected
app by
searching for Safety 1st in the app store.
Setup
1. Connect the micro USB cable with power adapter to monitor.
Staus LED will fl ash red and the device is now ready for pairing.
2. On your mobile device, follow the step by step instructions in the
Safety 1st Connected
app for setup.
3. Once paired, the status LED will turn blue.
4. Explore the features and functionality within the
Safety 1st
Connected
app.
Wi-Fi Connectivity
A 2.4GHz Wireless Internet with > 2Mbps available download/upload
speeds is required.
Check the Wi-Fi signal strength from your internet service provider.
To reduce signal interference or echoes,
avoid placing the monitor
near major electrical appliances, large metal or concrete surfaces.
Cleaning & Disposal
Cleaning
Clean product with a slightly damp cloth or with an anti-static cloth.
ALWAYS
unplug from electrical outlet before cleaning.
NEVER USE
cleaning agents or abrasive solvents.
DO NOT
clean any part of
the product with thinners or other solvents and chemicals - this may cause
permanent damage to the product which is not covered by the warranty.
Keep product away from hot, humid areas or strong sunlight, and do not let
it get wet.
Every effort has been made to ensure high standards of reliability of your
product. However, if something does go wrong,
please do not try to repair it
yourself
- contact Consumer Care for assistance.
Disposal
At the end of the product life cycle,
you should not dispose of this product
with normal household waste.
Take this product to a collection point for the
recycling of electrical and electronic equipment.
Some of the product materials can be re-used if you take them to a recycling
point. By reusing some parts or raw materials from used products you make
an important contribution to the protection of the environment. Please
contact your recycling center in case you need more information on the
collection points in your area.