13
14
Adjust Headrest to the
Highest Position
Pull the metal headrest adjustment
bar on the back of the seat and
slide the headrest all the way up.
Release metal headrest adjustment
bar into slot to lock. Make sure metal headrest adjustment bar
is securely locked into place.
This will expose all the upper harness slots.
C-2
Preparing Child Restraint to Fit
Your Child
Release Chest Clip
Press on chest clip release button
and pull apart.
Loosen Harness Straps
Push in on the harness adjustment
lever under the flap. Pull out on
harness straps just above buckle
tongues.
You
MUST
make these adjustments with your child before
you install the child restraint in the vehicle.
continued on next page.
3.
4.
Pull UAS Belt Packaging Out
from the Shell
Remove UAS from any packaging.
Discard the packaging.
1.
2.
Secure UAS
You
MUST
attach the UAS hooks
to the UAS attachments as shown
when not in use.
C. Basic Use
6.
Place Child in Child
Restraint
Place the child’s bottom and
back flat against the child
restraint. This will increase
comfort and allow the harness
straps to be properly tightened.
7.
Unbuckle Harness
Press down on the red buckle
release button to release the
buckle tongues. Place harness
straps over sides of child restraint.
5.
Check Buckle Position
Determine which of the three
buckle strap slots that is both
comfortable and snug to use.
NOTE:
Thread buckle strap
through the slot closest to
child.
You
MUST
use the 1st or 2nd buckle strap
slots when rear-facing. Any slot can be used
for forward-facing.
1
2
3
8.
To Change Buckle Position
Remove child from child
restraint.
Turn the child restraint over
and locate buckle strap’s
metal retainer.
9.
