57
58
sewn
end
9
10
Attach 1st Harness Strap
Loops to Splitter Plate As
Shown
Sewn ends of the harness strap
loops
must
face towards you.
Do
not
twist harness strap or harness
adjustment strap.
Make sure the same harness strap
loops are fitted
completely on
both
sides of the splitter plate.
Harness strap loop ends
must
go
through the recline stand as shown.
Harness adjustment strap
must
lie
under the harness strap as shown.
8
7
From the Back,
Pull Harness Strap
Through Pad and Shell
Harness strap
must
be under the
headrest adjustment bar as shown.
Do not
twist harness strap.
Thread Buckle and
Chest Clip
Harness strap ends go through the
back
of buckle tongues and through
the chest clip
front to back
as
shown.
Thread Harness Straps
into Correct Shoulder
Harness Slots for Your Child
Harness strap
must
be under the
headrest adjustment bar as shown.
Do not
twist harness strap.
For
Rear-Facing
child fi t, see page 8.
For
Forward-Facing
child fi t, see page 9.
WARNINGS:
The harness system must be installed
correctly. Do not use a child restraint with damaged
harness straps.
Recline Stand
Harness Adjustment
Strap
Check your child’s fit often.
If you cannot achieve a snug harness fit for your child,
see pages 15-17.
To learn how to check harness tightness,
see pages 48-50.
Check the harness straps often for any wear or damage.
