Rear-Facing LATCH:
Lower Anchor Install
33
continued on next page
34
Release Elastic Straps From
Tabs on Bottom of Shell and
Pull Seat Pad Off the Front of
the Shell
Before you begin installing the seat
into your vehicle, did you check:
Your child’s weight and height?
5-40 lb
(2.3-18 kg)
and
19-40 in.
(48-101.6 cm)
Your child’s fi t? See page 8.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
Remove Lower Anchor Belt
from Storage Location
Or if the lower anchor belt was used
Forward-Facing,
remove it from the
Forward-Facing belt path so both hooks
are on the same side of the seat.
1
2
Locate Rear-Facing Belt Path
Route the lower anchor hook through
the
Rear-Facing Belt Path
opening as
shown.
The lower anchor belt adjuster can be
on either side of the car seat.
Pull Lower Anchor Belt
Across the Seat
It must be under the seat pad, in front
of the buckle, and go out through the
other belt path opening.
Do not twist belt.
Finished Lower Anchor
Belt Routing
1
2
3
4
5
6
Pull Down Recline Stand to
Unlock and Fold It Under Child
Restraint
Loosely attach the tether hook to
storage location before folding recline
stand.
Fold recline stand and then gently
tighten tether strap to remove slack.
Adjuster
