(LD of batter screw/door being removed)
STEP 7 Remove Rechargeable battery and unclip power source wire as
shown. Take battery to store with you to assure a correct battery selection
when purchasing a replacement
(LD of Battery clip being separated)
STEP 8 Reattach new battery power source wire to Base unit power source
clip as shown.
(LD of Battery clip being reattached)
STEP 9 Replace Rechargeable Battery Compartment Door and resecure screw.
(LD of batter screw/door being resecured)
Parent’s Unit:
For best results, the Parent’s Unit should be placed at least 10 feet away
from the Baby’s unit. The Parent’s Unit can be mounted to the wall by using
a screw (not included) to hang the unit using the keyhole on the belt clip on
the back of the unit.
STEP 1 Select Channel to correspond to Channel on Baby’s Unit.
STEP 2 Place the Parent’s Unit at least 10 feet from the Baby’s Unit.
STEP 3 Plug the adapter into an electrical outlet, then plug the round end of
the adapter cord into the jack on the Parent’s Unit. Turn the Unit on and set
an appropriate volume level to hear baby at all times. The power-on LED Light on the
Unit should be illuminated and solid green. Note: If using optional 4 AAA batteries (not
included) for power, power-on LED will glow solid red when batteries need replacing.
STEP 4 For optional battery power, do not attach AC Adapter. Slide the
Battery Door open in the direction of the arrow and insert 4 AAA batteries
(not included). Ensure the (+) and (-) symbols match those shown in battery compartment
as shown.
(LD of battery insertion)
Using Intercom Feature
STEP 1 To let baby hear your voice, press Talk Button and speak directly into the
microphone.
