background image

Registration and Safety Notices

56

55

Replacement Parts Order Form

If you don’t have the card or if your ad-
dress changes, you will find the model 
number, manufacture date, and line code 
on the label located on side of shell.

Example of model number, manufacture date, and line code.

Please complete the postage-paid registration card that came 
with your child restraint, and send it to us. Child restraints could 
be recalled for safety reasons. You must register this restraint to 
be reached in a recall. Send your name, address, email address 
if available, the restraint’s model number, and manufacturing 
date to:

Dorel Juvenile Group, Inc.
Consumer Relations Department

PO Box 2609, Columbus, IN 47202-2609 

or call 1-800-544-1108 or register online at www.djgusa.com/
registration/carseat/us.

For recall information, call the U.S. Government’s Vehicle Safety 
Hotline at 1–888–327–4236 (TTY: 1–800–424–9153), or go 
to http://www.NHTSA.gov.

Model 

Number

Line 

Code

Manufacture 

Date

Complete the form. Your model number and manufacturer date 
code 

MUST

 be included on the form to ensure proper replacement 

parts. The codes can be found on a label on side of child restraint. 
Payment in U.S. dollars must accompany your order. Choose parts 
needed from the list on the next page. Return the form with pay-
ment to:

Dorel Juvenile Group, Inc.
Consumer Relations Department

P.O. Box 2609
Columbus, IN 47202-2609

Fax orders to: 1-800-207-8182

Please make money orders payable to Dorel Juvenile Group, Inc. 
Fill in the area on next page to charge to Visa or MasterCard. We do 
not accept cash or personal checks. All outside of U.S. and Canada 
MUST use credit card.

Ship To:

 (Please Print) 

Name:

_______________________________________

Address:

_____________________________________

City:

_________________________________________

State/Province:

_______________

Zip

_______________

Telephone: 

___________________________________

Email Address:

 ________________________________

We 

MUST 

have this information:

Model Number (8 to 9 characters)

:_________________

Manufacture Date (mm/dd/yyyy)

:__________________

4358-6653 Grow and Go 3 in 1.indd   61-62

4358-6653 Grow and Go 3 in 1.indd   61-62

4/15/15   8:48 AM

4/15/15   8:48 AM

Summary of Contents for Grow and Go 3-in-1

































Reviews: