8
017396, 017398 - Envy Stroller - 12 - 16
Assembling: Envy Stroller
TO ATTACH REAR WHEELS TO AXLE
• Place stroller on its side.
• Fit both the left and right hand mudguards (
Figure 2a) to the frame by
positioning the large holes in the mudguards over attachment lugs on the
frame then push the mudguards down until they lock into position (
Figure 2b).
• Insert the wheel axles into the wheel hub assemblies. Push the wheel onto
the wheel hub until the wheel locks into position (
Figure 2c). Repeat for both
sides.
• To remove the rear wheels, press the metal tab located underneath
the rear wheel assembly and pull the wheel away from the stroller
and remove wheel on each sides (Figure 2d).
• Never Flat tyres do not require air. The tyres are maintenance free.
Notes:
PRESS
L
R
2a
2c
2b
2d
