12
017396, 017398 - Envy Stroller - 12 - 16
Assembling: Envy Stroller
ADJUSTING HANDLE HEIGHT
• Press the button on the middle of the handle, as per
Figure 8a.
• At the same time slide the handle either up or down to your desired
position release the button and allow the handle to lock into position,
as per
Figure 8b.
PRESS
ATTACHING BUMPER BAR
• Stand the stroller upright and align the bumper bar to the stroller, as per
Figure 7a.
• Push the pins on the ends of the bumper bar into the holes in the frame as
shown in
Figure 7b, ensure that the bumper bar has locked into position.
A
Note: To remove the bumper bar. Press the bumper bar release button
(
A), located underneath the bumper bar on each side of the
stroller seat, as per Figure 7b.
7a
7b
8a
8b
