5.
Check Belt Tightness
Hold the car bed at the belt
path with your weakest hand.
Push and pull from side to
side.
If it moves more than 1 in.
(2.5 cm), try reinstalling the
car bed, try another seating
location, or try using the
vehicle belt.
3.
Hook LATCH to Vehicle
LATCH Anchor
Fasten one LATCH belt hook to
the anchor located in the vehicle
seat bight.
Repeat for other side of car bed.
4.
Tighten Belt
Lay your forearm across the
car bed while pulling up on
free end of LATCH belt to
tighten.
Repeat for other LATCH belt.
27
28
2.
Place Car Bed Side Facing in the Back
Seat with Child’s Head Towards the Center
of Vehicle Seat
LATCH/Vehicle belt loops must be on the side of the car
bed that is against the vehicle seat back as shown.
To move the belt loops and LATCH belts, see pages 14-17.
Handle MUST be upright AND locked when installed in
the vehicle.
4358-6748 Dream Ride LATCH.indd 31-32
4358-6748 Dream Ride LATCH.indd 31-32
4/7/15 4:48 PM
4/7/15 4:48 PM