C. Basic Use
29
30
C-10
Canopy Use and Installation
To Remove Canopy
Unfasten the fastening strip
on the back of the carrier.
1.
Slide Canopy to One Side
Slide the canopy to one side
of the carrier to expose the
canopy hoop connection.
2.
To Adjust Canopy
Grasp the front or sides of
the canopy and move front
to back to desired location.
4.
Undo Canopy Hoop
Pull top canopy up and
bottom down where they
connect to unhook. Then
pull the hoop apart.
Reverse to put back
together.
3.
C-11
Infant Insert (on select models)
Basic Insert:
To Remove Infant
Insert
Unthread the harness
from the splitter plate.
Pull harness through the
top slots and remove
the insert. Rethread the
harness straps and connect
them to the splitter plate.
Reverse to install the infant
insert.
NOTE:
Depending on your model, choose the correct method
to remove/install your infant insert if your model has an infant
insert.
When using the infant insert, make sure insert does not cover
your infant’s face in anyway. Remove the insert for older
babies.
Deluxe Insert:
To Remove Infant
Insert
Undo the fastening strips
and pull the infant insert
out from behind the
harness straps.
To Install Infant Insert
Undo the fastening strips
and fit the head/hip roll
behind the harness straps.
Refasten the fastening
strips.
Summary of Contents for Comfy Carry Elite
Page 1: ......
