manualshive.com logo in svg

Safety 1st Comfy Carry Elite, Instructions Manual

Share
Download
Safety 1st Comfy Carry Elite Instructions Manual Download Page 14

C. Basic Use

25

26

 C-7 

Removing Child From Child Restraint

Loosen Harness 

Press on harness release 
lever while pulling on both 
harness straps above the 
buckle to loosen.

1.

 

Release Chest Clip 

Press on release button and 
pull apart.

2.

 

Unbuckle 

Press red button on buckle 
to release the buckle 
tongues.  Move harness 
away from child and remove 
child.

3.

 

Remove Harness 
Straps from Splitter 
Plate 

Fully loosen harness 
straps. Locate splitter 
plate on the back of 
the child restraint and 
unfasten the harness 
straps.

1.

 

Remove Harness 
Straps 

Pull harness through the 
slots from the front 

(1)

.  

Unthread harness from 
the chest clip 

(2)

. 

Unthread harness from 
the buckle tongues 

(3)

.  

The harness straps do 
not need to be completely 
removed from the shell 
to remove the pad for 
cleaning.

2.

 

 C-8 

Removing Harness System

1

2

3

Summary of Contents for Comfy Carry Elite






























Reviews:

No comments

Brands by name

Popular brands

Load more brands