Tighten Belt
Place your hand in the car
seat and firmly push the
car seat down and back
towards the vehicle seat.
Pull the belt towards you
and parallel (in line) with the
belt path as shown.
For the LATCH belt or Lap
Only Vehicle Belt:
it may
be easier to tighten if you
route the free end of the
belt back into the
Forward-
Facing Belt Path
, reach
into the
Forward-Facing
Belt Path
, and pull the free
end of the belt towards you.
Tighten Tether
Push firmly on the back of
the car seat and pull the
free end of the tether strap
to remove all of the slack.
8
17
18
Check Belt
Tightness
Hold the
Forward-
Facing Belt Path
with your
non-dominant hand. Push
and pull from side to side.
The car seat should not
move more than
1 in.
(2.5
cm).
10
If the car seat moves more than 1 in.
(2.5 cm),
you can try:
• Pulling the belt tighter;
OR
• Reinstalling the car seat;
OR
• Changing to a different seating location;
OR
• Switching to a different install method (LATCH or vehicle belt).
9
Buckle Vehicle Belt
If your car has a
switchable retractor,
use it to lock the vehicle
belt. Review page 57
of this manual or your
vehicle owner’s manual.
Attach Lower
Anchor Belt Hooks
to Vehicle’s Lower
Anchors
7
OR