14
13
Forward-Facing
Vehicle Install
Before installing the car seat in your vehicle, check to see if you
need to adjust the buckle position for your child.
See page 11 for
child fit.
Once the car seat is installed, you will not be able to adjust the
buckle position.
Review Vehicle Owner’s Manual
Determine what kind of vehicle belts your car has and how to use
them to lock a car seat in place
OR
where LATCH: lower anchor
seating positions are located in your vehicle.
There are 2 different methods for install.
Use only one:
Vehicle Belt
for children up to 65 lb
(29 kg)
LATCH: Lower Anchor Belt
Do not
install by this method for a child
weighing more than 55 lb (25 kg)
DO NOT
use both the LATCH: lower anchor belt and
vehicle belt at the same time to install the car seat.
When anchors are available you
MUST
ALWAYS
attach,
adjust, and secure the tether (top anchorage) strap
when installing the car seat in the Forward-Facing
Mode with internal harness.
OR
WARNING:
2
If your vehicle has a headrest
that interferes with a flush car
seat fit, check your vehicle
owner’s manual to see if it can
be removed, adjusted, or if there
are other possible seating
locations for you to install.
1
Place Car Seat
Forward-Facing
in
Back Seat
The vehicle seat back
MUST
be upright.
Locate Vehicle Top
Tether Anchors
Review your vehicle
owner’s manual for top
tether anchor locations
and how to route the
tether strap when there
are vehicle headrests.
continued on next page