22
C-6
Reclining Child Restraint
This child restraint has 3
positions:
Rear-Facing -
Recline
restraint so that the level lines
on shoulder belt-positioning
guide are level with ground.
Forward-Facing -
3
Upright
or
2
Semi- reclined.
NOTE:
When forward-facing,
the semi reclined position is to
be used only to install the child
restraint flush against the back
of vehicle seat back.
To Recline
Pull out on handle.
For upright position, pull out
on handle and position the
child restraint upright.
21
C. Basic Use
1
2
3
Harness system MUST be removed to use this
child restraint as a Belt-Positioning Booster.
Remove Harness Straps
from Splitter Plate
Fully loosen harness straps.
Locate splitter plate on
the back of the seat and
unfasten the harness straps.
1.
Store Splitter Plate
Raise headrest all the way
up. Store splitter plate
by pushing it through one
opening and out the other.
2.
Remove Harness
Straps
Pull harness through the
slots from the front
(1)
.
Unthread harness from the
chest clip
(2)
.
Unthread harness from the
buckle tongues
(3)
.
Pull harness out of shell
(4)
.
3.
C-7
Removing Harness System
1
2
3
4
continued on next page.
4.
Locate Buckle’s Metal
Retainer
Fully recline the child
restraint. Reach under the
seat between base and shell.
