C. Basic Use
21
22
Harness Covers
The harness covers help to provide
comfort to the infant’s neck. For
harness covers to fit correctly you
may have to push the ends of the
covers through the upper harness
guides.
There are different harness cover
styles, depending on your model.
To remove the harness covers
with fastening strips, you will have
to undo the fastening strips and
remove harness covers.
To remove harness covers without fastening strips, you will
have to unhook the harness straps from splitter plate, pull
harness straps out of the upper harness guides and remove
harness covers. Rethread harness straps and re-hook the
harness strap loops onto the splitter plate (see section C-9).
Lumbar Support
There are different lumbar support
styles depending on your model.
To remove the lumbar
support either, loosen harness
system and pull the lumbar
support out from behind the
harness system; or remove the
buckle (see section C-2) and pull
the lumbar support out from behind
the harness system. Replace the
buckle (see section C-2).
Body Pillow
To remove the body pillow, slide out
from behind the harness straps.
Head Pillow
The head pillow provides extra
comfort for your child. To remove the
pillow, undo the fastening strip from
behind the headrest and remove the
pillow. Reverse to replace the pillow.
C-6
Reclining Child Restraint
To recline, pull out on recline
handle and push top of child
restraint back.
For upright or semi-recline
position, pull out on recline
handle and pull top of child
restraint forward.
This child restraint has 4 positions:
Rear-facing
-
4
Fully recline the child restraint so
that the bottom level to ground
line is level with the ground or
for older children, rotate the child
restraint between the top and
bottom level to ground lines on the side of the shell.
Forward-Facing -
1
Upright or
2
or
3
Semi-reclined.
Booster Seat -
1
Upright
NOTE:
When forward-facing, the semi-reclined position is
to be used only to install the child restraint and booster seat
flush against the vehicle seat back. Vehicle seat back must be
upright.
4
3
2
1
4358-6199 Elite Eng.indd 23-24
4358-6199 Elite Eng.indd 23-24
10/11/12 4:11 PM
10/11/12 4:11 PM
