7
Operating Your Home Connection Monitor System
4
On/Off
Volume
Control
To Use the Baby’s Unit and Parent’s Units (continued):
Scan Feature:
8
.
The Parent’s Units can scan each
Baby’s Unit for three second
intervals. For example, Baby’s Unit A
is monitored for three seconds and
the corresponding colored LED
illuminates. Next, Baby’s Unit B is
monitored and so on. Press the Scan
button to turn Scan
On
. To turn
Scan
Off
and listen only to one
Baby’s Unit, press the room selector
button that corresponds to the
Baby’s Unit (Figure 5).
Two-way Talk Feature:
9
.
The two-way talk feature on each
Parent’s Unit allows the parent to
communicate with someone on the
second Parent’s Unit. Press and hold
6
.
Adjust the volume by turning the
knob on the side of each Parent’s
Unit. Check the battery LED on
the Parent’s Units to be sure the
unit is charged (green). If the Low
Battery LED is illuminated amber,
you need to recharge the Parent’s
Unit (Figure 4).
7
.
To listen to a Baby’s Unit press the
room selector button that
corresponds to the Baby’s Unit that
you want to monitor. Each Baby’s
Unit is color coded to match the
corresponding button on the
Parent’s Units.
Low
Battery
LED
(Amber)
5
Baby’s
Unit A
Scan
Button
Baby’s
Unit B
Baby’s
Unit C
Talk
Button
the talk button. Release button to listen (Figure 5).
Secure Sound Lights:
10
.
The 5 sound lights on the Parent’s Units indicate the sound level of the room
that you are monitoring. The more noise in the selected room, the more
sound lights will illuminate.
CAUTION:
Test the Parent’s Unit before each use. It is essential to check reception
regularly.
IMPORTANT:
The first time you use your Home Connection Monitor System, go
through the section “To Test the Reception” with two adults.
08038_inst_E_112103 12/10/03 2:01 PM Page 7
