PLEASE READ THE FOLLOWING WARNINGS AND ALL ASSEMBLY
INSTRUCTIONS CAREFULLY BEFORE USING THE SO CLOSE CRIB
MONITOR. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
TERMS USED IN WARNINGS:
The term “Receiver” corresponds to “Parent’s
Unit” and the term “Transmitter” corresponds to “Baby’s Unit” in the rest of this
instruction booklet.
• The Home Connection Monitor System is not intended to replace
responsible and proper parental supervision.
• Check your child’s activity at regular intervals as this monitor will not alert
parents to the silent activities of a child.
• Before using your Home Connection Monitor System:
- Read and follow all instructions carefully.
- Read and observe all warnings on the product and in this
instruction booklet.
• To prevent entanglement with the adapter cord,
NEVER
place the
cord in or near a crib or playpen.
DO NOT
place the Transmitter or
Receiver anywhere its AC adapter cord could be within reach of children.
•
ALWAYS
KEEP THE TRANSMITTER, RECEIVER AND AC ADAPTERS
OUT OF REACH OF CHILDREN.
• This product is not intended to be used as a medical monitor and its
use should not replace adult supervision.
• It is essential to check reception regularly. Please see the Testing
Reception section for complete instructions.
• The Transmitter is intended for indoor use only.
•
NEVER
use the Transmitter or Receiver near water. For example, do not
use near a bathtub, bathroom sink, laundry tub, kitchen sink, in a wet
basement, etc.
• Always unplug the AC adapters from wall outlets during long periods
of non-use.
• Position the Transmitter, Receiver and AC adapters to allow adequate
ventilation and prevent these components from overheating.
• To prevent overheating, keep the Transmitter, Receiver and AC adapters
away from heat sources such as radiators, heat registers, stoves or other
appliances (including amplifiers) which produce heat. Also keep these
components out of direct sunlight.
• Use only the AC adapters provided. Use of any other adapters may
damage the Transmitter and/or Receiver. Plug the AC adapters into
standard household current only (120V AC outlet)! To prevent
entanglement and overheating,
DO NOT
use extension cords.
• The AC adapters may become slightly warm to the touch during operation.
This is normal.
• Position the AC adapter cords so that they are not walked on or pinched by
items placed upon or against them, paying particular attention to cords at
AC adapter plugs, wall plugs, and the point at which the cords attach to the
Transmitter and Receiver.
WARNING
2
08038_inst_E_112103 12/10/03 2:00 PM Page 2
