www.safescan.com
8
SETTING A BATCH NUMBER
DELETING A BATCH NUMBER
To set a batch number:
1.
Press [
SETTINGS
].
2.
In the display the default batch number of € 0,01 is shown.
3.
Use [
+
] or [
-
] to adjust the batch number in steps of 1. Pressing and holding the [
+
] or [
-
] button
increases or decreases the batch number by 10.
4.
Press [
PRINT/>
] to switch to the next denomination.
5.
Repeat stept 3 and 4 until the batch number of all denominations has been set.
6.
Press [
START
] to exit the batch settings menu.
Note
: batch number 0 means no batch has been set.
Press the [
CLEAR
] button to delete the batch number of the selected denomination.
Press and hold the [
CLEAR
] button for approx. 2 seconds to clear all set batch amounts.
If during counting the batch amount of a coin denomination is reached, the 1450 will stop.
Press [
START
] to resume counting.
BAT ON
005
20
€
BAT ON
0
€
001
No batch stop for € 0,01 coin
Counting stops at 20 pcs of 5 cent coins
Counting stops after 20 coins of 5 cents
BAT ON
PCS
20
100
ENGLISH