Globalis International
PR9 SERVICE MANUAL-VER1.1 Page 33 of 112
Debug/Test
Content: Hex printing(include: data backup, printing backup data,
directly dump), magnetic stripe operation (include read and write)
，
The relative printing content refer to appendix .
Objection
：
Maintenance and Service engineer
Inquiry
Content: Inquiry the current setting parameters of software or
hardware, including version (FW version, special version tag,
special emulation, FPGA Version, etc.), hardware configuration
(characters generators, optional interface, scanner, sprocket),
printer ID etc.
Object: The one who need to get the configuration of printer
including engineers, user and so on.
As following table shows:
Off-line operation
Menu
Setup
Printing
Test
Adjustment
Debug/test
1
Photosensor
value
2
Left Marg.
3
Top Marg.
4
Run-in test
5
Bidirection Align
6
Print Photo Value
7
Inquire
photosensor Value
8
Resume Hw
parameters
1
User s guide
2
Chinese
character
3
Ascii
character set
4
Character
attributes
5
Dr. Grauert
1
Hex
printing
2
Magneic
Test
1
Select current
Macro
2
Select Macro to
Setup
3
Configure
4
OLIVETTI Configure
5
OKI Configure
6
IBM Configure
7
LQ Configure
8
IBM9068 Configure
9
LANGUAGE
10
Save Parameters
Inquire
information
1
Version
2
HW
configuration
3
ID
Menu
printing
Pressing down station2 and
compress keys at the same time and
entering
Entering
LEVEL 1
Entering
LEVEL 2
3.3. OPERATING PROCESS
During all the operations, generally, pressing the FEED/EJECT
▲
key
means upwards (It may cycle to the last item from the first one),
pressing the COMPRESS
▼
key means downwards (It may cycle to
the first item from the last one.): pressing STOP
▉
key means accept;
