SafeMi C17-L, User Manual

Page: 7 / 58


Do not paint the device.
 Do not manipulate any element as this may lead to product failure, short circuit and risk of
death.
 Get fresh air outside immediately or open all doors / windows to ventilate the room and
allow the CO to dissipate.

If possible, turn off the fuel burning appliance.
 Evacuate people from the building.

Do not re-enter the property or approach open doors / windows until emergency services
arrive, the property is aired, and your sensor returns to normal operation.

Seek medical attention immediately for anyone suffering from symptoms of headache,
drowsiness, nausea, etc.

Do not use the equipment again until it has been checked by a qualified technician and the
fault has been located and rectified.
Device response time (in accordance with EN50291)
CO concentration Time until alarm sounds
50 ppm 60 – 90 minutes
100 ppm 10 -40 minutes minut
300 ppm 3 minutes
WARNING: Avoid using the CO Alarm in the following situations to not affect
the alarm lifetime: The device should avoid contact with organic solvents
(including silicone and other adhesives), coatings, drugs, oils and high
concentration gases. This device must not be used in an environment
containing a corrosive gas that may damage the device.
DE
PL
CS
SK
HU
RO
BG
UA
EN