Switch of voltage Selection
Press switch up for charging 6V battery and press switch down for charging 12V battery. Charge
voltage can not be selected after charging or during charging
Switch of Power ON/OFF
Press switch up is ON and press switch down is OFF. Before you press the switch make sure that the
battery charging voltage is selected correctly, it is very important, if you choose wrong, it will damage
the battery or charger.
LED Display of Charging condition
The LED will indicate the charging condition when charging.
Charging current switch
When charging the battery according to the battery capacity (refer to the battery charging current
can be recommended in the specification), the current selection switch to select suitable battery
charging current, charging current can not exceed the maximum current of the battery, so as not to
damage the charger or battery.
Power Indicator,
Green light
Battery Recovery, Yellow flash
light
Charging,
Yellow Light
Charged, Green light
Output short circuit or battery
reverse connection
，
Red flash light
Internal temperature protection
，
Red light
Dead battery
，
Red flash light
