Available users and default codes
User
ID
Code
Master
N/A
12345678
Manager
N/A
123456
Users 02 - 90
02-90
Users must be added by
the Manager
Default codes must be changed immediately.
Using the keypad
Press any key to wake the display to the Home Screen
If a key is not pressed for 30 seconds, the keypad
display will automatically switch off.
To access the main menu press
To scroll menu items press
To accept press
To exit a menu or function, press and hold
or scroll
to EXIT.
Shortcuts for Special Functions
Press and hold the relevant key to access the shortcut.
Key
Special Function
0
Change Code
5
Test the keypad
6
Access the Manager menu
8
View keypad firmware version
To open the lock
Enter a valid User ID and 6-digit code, or press
to
enter the Manager code.
To open the lock if time delay is active
Enter a valid User ID and 6-digit code, or enter the
Manager code. Wait for the time delay period to elapse.
The open window will be indicated with the onscreen
message “OPEN WINDOW” and double beeps at 5
second intervals.
Enter a valid User ID and 6-digit code or press
to
enter the manager code.
To stop time delay counting, press
then
to
confirm.
To change code
Shortcut:
Press and hold 0 or;
Press
to access the main menu, scroll to CHANGE
CODE. Press
to accept.
Scroll to CHANGE USER or CHANGE MANAGER or
CHANGE MASTER. Press
to accept.
Enter the ID if required and enter the old code.
Enter the new code twice.
To access the Manager Menu
Shortcut:
Press and hold 6 or;
Press
to access the main menu, then
to scroll to
the Manager menu.
Enter the Manager code. Press
to scroll through the
menu options and
to make a selection.
The Manager can:
Open the lock
Manage Users
Adjust time delay settings
Start a connection to a PC to take an audit
View an onscreen audit
To manage Users (Manager Only)
Access the Manager menu, scroll to USERS
MANAGEMENT. Press
to accept.
The following symbols indicate the status of each user
Press
to advance each page.
Enter the ID of the User to be added (Use 2 digits). The
cursor will flash underneath the User ID.
Press
to access options.
Press
to scroll through options and follow the
onscreen instructions.
INSTALL
– add a User code. The user must enter their
code twice.
DELETE
– if a User is installed, their code can be
deleted, making it possible to add a new different code.
DISABLE
– If a User is installed, their code can be
temporarily disabled.
ENABLE
– If a User code has been temporarily
disabled, it can be re-enabled.
To add time delay values
Access the Manager menu, scroll to T. DELAY AND
O.WINDOW, press
to accept. The display will show
the current time delay values.
Press
Enter time delay value e.g. 01 minute (Max. 99 minutes)
Enter open window value e.g. 01 minute (The minimum
open window value is 01, the maximum is 19).
Press
to accept.
Note:
If the time delay values are to be reduced, the
lock must first be unlocked during the open window and
the bolt must be held in the open position before again
accessing the time delay menu.
Symbol
Status
No Symbol
User deleted
User installed and enabled
X
User disabled
