5
© 2010 SafeLine and all the SafeLine products and accessories are copyrighted by law.
ENGLISH V. 1.00
04.2010
CONFIGURATION
VA4 can be programmed in SafeLine Pro Version 2.23 or later (V3.30 recommended). Reconfi guration and
changes to previously recorded messages can easily be made.
SafeLine Pro can be downloaded for free on our web site: www.safeline.eu.
Downloading new voice messages:
If the prerecorded messages need to be changed or if new messages have to be added we can send
the fi les to you by e-mail and you can easily download them in VA4.
When recording and downloading own sounds.
A sound fi le name can be no longer than 59 characters. The sound have to be in wav-format, mono with
16-bits resolution and 8 or 16 kHz sample frequency
PCM. VA4 is normally delivered with 2048 KB Flash-memory this is enough for 240 sec of recording at 8
kHz or 120 sec in 16 kHz. Both 8 and 16 kHz sampled *.wav-fi les can be downloaded in the same VA4.
If you have recordings in any other resolutions or format they have to be converted fi rst.
Inputs:
Standard confi guration at delivery is:
Input 1-4, are Binary inputs 1,2,4,8.
Input 5-8 are fi xed messages that are used for all fl oors like ”Doors are closing”, ”Lift is overloaded”, ”Fire
alarm” etc.
Confi guration:
The inputs can be confi gured with SafeLine Pro:
Binary / Decimal / Gray code inputs for maximum 1-32 fl oors.
Fixed messages 1-8 can be selected.
Trigg signal: Floor message can be played when a trig input is activated, or when one of the inputs status
are changed.
All changes and downloading of new messages have to be made from SafeLine Pro.
Polarity and voltage:
The input voltage can be b20-30 VDC.
If “Active 0 input” is activated a 0 VDC signal activates the input.
Supply voltage must be 20-30 VDC.
