15
15
SL1 v.2.1.0 EN
Configuration data
Code Data
Comments
Enter configuration mode
00
Enter password
* - - - - #
Default = 0000
Exit configuration mode
*00*#
Alarm codes
Code Data
Comments
P100 ID code
*01*
- - - - - - - - #
P100 is always 8 digits
CPC ID code
*02*
- - - - - - #
CPC 6-8 digits
Q23 ID code
*03*
- - - - - - - - - - - - # Q23 is always 12 digits
Telephone numbers
Code Data
Comments
1st Phone number
*11*
- - - - - - - - - #
Phone number to alarm receiver 0-16
digits.
If calling through a switch board, delay time
can be set by adding asterisks between
leading number and telephone number.
Each asterisk is equal to one second delay.
Example: *11*(0)**1234567#
2nd Phone number
*12*
- - - - - - - - - #
3rd Phone number
*13*
- - - - - - - - - #
4th Phone number
*14*
- - - - - - - - - #
Call type
Code Data
Comments
Call type 1st number
*21*
- #
Change call type: 1-4:th number
0 = P100
1 = VOICE (Default)
2 = Q23
3 = CPC
Change this only if your alarm operator is
using any of the mentioned protocols.
Call type 2nd number
*22*
- #
Call type 3rd number
*23*
- #
Call type 4th number
*24*
- #
Call type LMS number
*30*
- #
LMS(Lift Monitoring System) call type
0 = P100
3 = CPC (Only battery alarm)
Parameter list
