5
© 2012 SafeLine and all the SafeLine products and accessories are copyrighted by law.
ENGLISH V. 2.61
Installation
USing The SiM card
before you can start using a new SiM card, the card has to be prepared and support 2g network.
cards that only support 3g will not function.
The GL2 can only recognize the PIN code if the code is set to “0000”, “1234”, “1111” . In some cases the
code can also be deactivated. If the PIN code is set to “0000” or if it is deactivated the SIM card can be
moved from the GL2 to any of SafeLine GSM products. If the code is set to “1234” the SIM card can be
moved to another GL2/GL2/GL4/GL5 unit if the software version is 3.10 or higher. TIP Do not activate the
mailbox or if possible ask your provider to deactivate the mailbox.
If the Pin code is set to “1111” the SIM cards code will be randomly changed by the SafeLine GSM unit
and memorized. This way the SIM card can only work with the SafeLine GSM unit unless you use the PUK
code for setting up a new PIN code.
The randomly chosen PIN code is memorized by the unit. If you want to upload a new SIM card with PIN
code “1111” you will need to fi rst upload a SIM card with PIN code “0000” or “1234” this to clear the old
code in memory.
pin code (set to “0000”, “1234” or deactivate).
1.
Insert the SIM card in an ordinary cellular phone. In the “Security settings” menu, change the PIN
code to “0000”. If this is not possible , set the PIN code to “1234” or set the ”PIN code request”
option to “OFF”(might not always work).
2.
Verify the PIN code by switching your phone off and on again.
3.
Make a call from your phone to verify that the SIM card is active, before you move it to the GL2.
4.
Also make a call to GL2 after insertion to check that it is possible to get a proper connection.
protect the SiM card against unauthorized use.
1.
Insert the SIM card in a cellular phone.
2.
In the “Security settings” menu, change the PIN code to “1111”. When the SIM card is inserted in
the GL2, the code will be changed to a random number, thus making it impossible to use the card
in another cellular phone unless it is unblocked by means of the PUK code.
NOTE!
If you enter the wrong PIN code 3 times, the SIM card will be blocked (requires
PUK code to de-block). The GL2 cannot be started and the LED (4) will be red.
If PIN code “1234” is used, make sure the SafeLine GL2 software is 3.10 or
higher.
