12
FD4-CAN v.2.1.0 EN/DE/SE
Volume, LED-brightness and node-ID are configured with the
buttons on the back of the unit. If no selection has been made after
a couple of seconds the unit will leave the “Settings-menu* and
return to normal mode.
Do not change NodeID!
Correct node-ID is set at delivery.
FD4-CAN normal mode
Hold both buttons
for 2 seconds
Mode to set message
volume. Press up/down
to set message volume
Press both buttons
simultaneously
Mode to set button
volume. Press up/down
to set button volume
Press both buttons
simultaneously
Mode to set
LED-brightness.
Press up/down to set
LED-brightness
Hold both buttons a
couple of seconds
Mode to set Node-ID.
Press up/down to
set FD4-CAN
Press both buttons
simultaneously
Unit will reboot
Configuration
