5
GENERAL USE
All warnings and instructions must
be provided to the authorised user.
They must be read and understood
in their entirety. Failure to use the
equipment properly can result in
serious injury or death. If in doubt,
contact SafeHold Ltd. for advice.
All authorised users must reference
the relevant local standards to
which the device complies (e.g.
EN360:2002). Refer to device
labelling for device compliance.
Before using the SRL-R/RTFA-R,
the worker must be trained in
the use and application limits of
the equipment, proper hookup,
anchoring and tie-off techniques,
methods of use and proper
methods of inspection and storage.
Ensure working area is free from
hazards and obstructions that
could interfere with the working of
the device or cause harm to the
user.
Inspect all equipment before each
use as per the manufacturer’s
instructions.
All equipment should be inspected
on a regular basis by a competent
person.
A competent person must ensure
the systems compatibility will not
allow accidental disengagement.
Any equipment must be as the
manufacturer intended. Do not use
altered or modified equipment.
Repairs must only be carried out
by the manufacturer or authorised
service agent with written consent to
do so.
Any product that has visual
deformities, been subjected to a
fall, deterioration or unusual wear
should be destroyed and removed
from service immediately.
A rescue plan with the means to
implement it should be in place
before using this equipment.
Fall protection equipment is
designed for a specific use. Never
use it for something it wasn’t
designed for.
Environmental hazards should
be considered when using this
equipment.
Equipment should not be exposed
to hazardous chemicals. Inspection
intervals may need to be more
Summary of Contents for SH-8061
Page 8: ...8 EXAMPLE OF INCOMPATIBLE CONNECTIONS CORRECT CONNECTION...
Page 26: ...26 USER NOTES...
Page 27: ...27...
Page 28: ...28 www safe hold com...