Safety Instructions
Review the Installation Manual before proceeding.
If there are any questions regarding safe installation or operation &
performance please contact us at:
Prior to any handling, the Power Supply must be disconnected from the
Mains.
Only an experienced and authorized technician or electrician, who is
qualified to work on the electrical grid while taking necessary
precautions that comply with the electrical code should perform
installation.
Before Installation:
Make sure that P.S input voltage configuration matches the standard
utility voltage level.
Make sure that P.S output voltage configuration matches the CATV
voltage requirements.
Recheck circuit breaker and
(ELCB).
Connect grounding cable between P.S grounding to utility grounding
point.
Safety:
Prior to installation or removal recheck that utility circuit breaker is OFF
and that there is no voltage at the P.S.
Only a licensed electrician should install the P.S.
Ensure that all cables are dry and wet-protected.
4
