4
UK
Remove the protective layer to expose the
adhesive on the Catch (C).
Swivel the EZ-Tool™ slightly until the Moun-
ting Plate is parallel to the drawer/cupboard
door as they come in to contact. Remove the
protective layer to expose the adhesive on
the Mounting Plate.
Keeping all of the pieces together, hold the
stop tab of the EZ-Tool™ diagonally against
the side (lower drawers) or top of the cabinet
(cupboards or top drawers).
Gently close the drawer until it comes into
contact with the Mounting Plate, then use
your fingers and thumb to hold it firmly in
place for 30 seconds.
Roll the entire assembly over until the Catch
adheres to the cabinet, keeping the stop
tab in contact with the cabinet. Push the
Catch firmly onto the cabinet and hold for 30
seconds.
With your fingers still holding the Mounting
Plate, open the drawer, then press the locking
tab on the EZ-Tool™ so it can slide out.
