12
Use the optional One-way Stopper if you
want to open the Gate in one direction only.
Use both Allen Keys (N) to remove the bolt
on the handle that is closest to the opening
edge. Choose either the left or right One-Way
Stopper (O) and use the long barrel nut (P) to
fix one stopper on the handle.
Position the One-way Stopper on the side of
the Gate that
does
want to open. The small lip
fits under the bottom of the handle and the
curved end faces towards the side rail. Lining
up the holes in the One-Way Stopper and the
handle, use the Allen Keys to secure in place
with the bolt.
Using the Optional One-Way Stopper
To open and close the gate
To open the Gate, holding the handle, use your
thumb to slide the locking catch on the top of
the Gate Panel back towards the handle, and
simultaneously lift the Gate to swing it open.
The window in the handle will show red when
the Gate is open.
To close the Gate, lift the handle and lower
it onto the locating pins of the catch rail.
Alternatively, push the Gate and it will slam-
shut automatically. The window in the handle
will show green to indicate when the Gate is
securely locked.
Note:
The red line on the top, next to the
locking catch, should not show when the Gate
is locked. If it starts to show, readjust the width
of the Gate
(Steps 12-15)
.
16
15
UK
