Page 3
www.safe-t-cover.com 1-800-245-6333
Version 2.0
FIG. 2
NOTE: model sizes and configurations vary, see the Enclosure Plan View.
9.
Repeat the “D1” (roof) panel assembly on the other “B-A1-A2-B” (corner-end-corner) assembly.
10.
Inspect the alignment of the “C” (access) panels during assembly. Verify that their removal and
replacement allow adequate space and positioning with the adjacent panels prior to attaching brackets
to the concrete.
11.
Position the “D2” (roof) middle panel (Fig. 3) between the “D1” (roof) end panels and set it in place.
Place Inner Roof Connection Brackets under both “D1-D2” rafter panel connections on the inside and
then fasten them into place (Fig. 2E) using Hex Head Screws.
FIG. 3
