www.safehome.dk
7
h) Program the telephone numbers that you wish the GSM Dialer to call when your sys-
tem is triggered. The GSM Dialer can call up to 8 phone numbers.
I) Finally, select dialing cycles. This ranges from 1 to 9 cycles, the default cycle being
3. This is the number of times you would like your GSM Dialer to attempt to call each
phone number.
J) After you confi rmed the above setup information by pressing this button, you will
receive a confi rmation text message on the above settings from your GSM Dialer in a
few seconds.
K) You will now be able to manage settings using the smart phone
*All authorized users must be using the same security password after this has been
initially set. If you forget this, hold RESET to restore the GSM Dialer into its default. If
multiple Smart phones are being used the most recent one to change the settings will
have their programming entered into the system.
6. Controlling your system using Smart Phone
Application (App)
System control page
Every instruction is sent via a text message. A text message
acknowledgement corresponding to every instruction will
be sent in response. For a detailed description of the keys
press ‘i’.
Inquire page
• You can check the settings of your GSM Dialer and ensure
that everything is in order by pressing CHECK SETUP on
the INQUIRE page. A text message response will list tele-
phone numbers, dialing cycles as well as the power status
of any associated Smart Panel.
• After every CHECK SETUP command the associated
device will enter HOME mode which allows for a combina-
tion of ARM and ALERT pre-assigned zones. You may need to send a command for the
desired operating mode of your system after the inquiry.
Activation of the Alarm
If a sensor is triggered or main power is cut, the #1 user will recieve a notifi cation by SMS.
Upon activation of the alarm the GSM Dialer will send a text message followed by a call
to the fi rst two recipients. When a recipient picks up they will hear the recording and will
then be able to listen in through the microphone. If nobody picks up, the GSM Dialer
may make repeated attempts corresponding to the number of dialing cycles set. After
all attempts have been made the next recipient will be dialed. After the last recipient is
called the GSM Dialer will resume with the fi rst recipient until the system is deactivated.
This can only be achieved by the user sending an SMS to the GSM Dialer or by discon-
necting all power sources from the GSM Dialer.
