SAFE HOME WS110-V2, Manual

Page: 2 / 20

www.safehome.dk www.safehome.dk 2
3
Table of Content
1. Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Introduction to Dialer Plus 3
1.2 Items included with the System 3
2. Installing the Dialer Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Determine the location of the Dialer Plus 3
2.2. Powering up the WS110 Dialer Plus 4
2.4. Connect the dialer WS110 to your home telephone 4
Section 3 - Programming the Autodialer . . . . . . . . . . . . . . . . . . . 4
3.1 To ENTER the SETUP mode while in the STANDBY Mode 4
3.2 To RECORD the message you want to play when
the dialer is triggered while in the SETUP Mode
4
3.3 To RECORD an effective message for help 4
3.4 To PLAYBACK the recorded message: 5
3.5 To CHECK PHONE NUMBERS stored: 5
3.6 To ENTER/STORE PHONE NUMBERS: 5
3.7 To DELETE a stored phone number: 5
3.8 To program the number of DIALING CYCLES 5
3.9 To change the 4-DIGIT PIN 6
4. Activating the Dialer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5. Instruction for the recipient . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5.1 To START speakerphone conversation 6
5.2 To EXTEND the time out for speakerphone conversation 6
5.3 To STOP the emergency message of the existing call
AND all the remaining calls.
6
5.4 To DISCONNECT all calls after conversation 7
6. Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
7. Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1. Getting Started
1.1 Introduction to Dialer Plus
The Dialer Plus works in conjunction with Safehome Security System (WS500S/WS300S).
When the alarm from the Smart Panel goes off after receiving reports of intrusion from the
sensors, the Dialer-Plus will be activated.
The Dialer-Plus can be activated in the following situations:
• Panic Buttons on the keypad of Dialer Plus (*) and (#) are pressed down simultane-
ously.
• The Panic button on the (WS500S) is pressed down.
• Safehome Security System is triggered and sends out the alarm activation signal.
For installation and proper use of the Dialer-Plus, please familiarize yourself with this User
Guide.
1.2 Items included with the System
Please check that all of following items were included in the package before installing the
dialer:
1 x Dialer
1 x Telephone Line
1 x AC adaptor
Manual
2. Installing the Dialer Plus
2.1 Determine the location of the Dialer Plus
• The dialer should be placed within a few feet of an electrical outlet, a telephone or near
any telephone jack. It’s recommend that you hide the dialer from sight for security
purposes.
• The dialer should NOT be easily accessible.
• The dialer should NOT be placed near doors or windows that could be accessed by
intruders.
• The dialer should NOT be placed near extreme temperature sources (oven, stoves etc.)
or near large metal objects that could interfere with the wireless performance.
Once you have selected a location for the Dialer Plus, you are ready to begin powering
up the dialer.