Copyright 2022© All Rights Reserved
3
OPERATION
STARTUP SCREEN
QUICK VIEW INDICATOR LIGHTS
ANTENNA SCREEN
MEASUREMENT SCREEN
RED:
Extreme
Move away from this exposure.
Flashing indicates more than 10x extreme.
Fast flashing indicates more than 100x extreme.
ORANGE:
High
Try to limit the time of your exposure at this level.
YELLOW:
Moderate
Reduce this level for long term exposure.
GREEN:
Slight
Good for sleeping areas and long term exposure.
Flashing indicates best and ideal conditions.
Copyright: Institute of Building Sustainability IBN: www.buildingbiology.com Bau biolog ie Maes: www.maes.de
First, attach the included semi - omni antenna, or optional high-gain horn antenna to the RF input
connector. Looking from above, turn the knob counter-clockwise to tighten. For optimum frequency
response using the semi - omni antenna, the SLT Logo should face forward.
To turn ON the unit, simply push and hold the power button. The startup screen will show the self
calibration process and the approximate battery level in percent remaining.
Next, select the antenna type that is attached with the mode button to move the -> symbol. Push
and hold the mode button to select that antenna.
You will now see the measurement screen.
Scan the area to record the highest max reading by moving the
meter in all directions while keeping it at least 30 cm or 1 foot from
your body.
If the RF levels are at or below a safe, long-term exposure level for
sleeping areas, the green LED will be solid or flashing. To change
display units from μW/m² to V/m or vice versa, press and hold the
max reset button down until the units change.
