100308837: 2 of 3; Rev A; Rev Date 12-AUG-201
Safco Products Company, New Hope, MN 55428
A
B
C
AND
B
D
C
E
E
CROSSWIRES ON OUTSIDE
BALL TO BACK
CORNERS FLUSH
Screw the A Casters into the threaded end posts of the
B Left Side Panel and the C Right Side Panel.
1
Arrange the B Left Side Panel, the C Right Side Panel,
and one of the D Front/Back panels as shown, upside
down and with the inner cross wires toward the OUT-
SIDE of the unit. Press E Spring Clips over the pairs of
wires at each corner, in the locations shown, from the
OUTSIDE of the unit.
2
Turn the unit right side up. Place the F Stepped Base
into the bottom of the unit, hooking the rear hooks
behind the ball on each side panel , and the front hooks
over the bottom wires next to the front casters.
3
Position one of the G Shelf Panels two wires above the
back of the stepped base, and attach with two E Spring
Clips along the back and two on each side. Now posi-
tion the other shelf panel two wires down from the top,
and fasten the same way.
4
F
BALL
BALL
HOOK
HOOK
HOOK
HOOK
G
E
E
E
E
E
8 SQUARES WIDE
Finally, place the remaining D Front/Back Panel fl ush
with the top shelf and the front of the stepped base, and
fasten with two E Spring Clips to each of the shelves
and three to each side panel.
5
E
E
E
E
D
