12
1. Carefully push the canopy to the bo om of the moun ng bracket, make
two sliding holes aligned to the two prominent screws on the moun ng
bracket, and then turn clockwise un l ght.
2. Push the canopy ring to the bo om of the canopy, slide the inner holes
aligned to the two prominent screws on the moun ng bracket again,
and turn the canopy ring clockwise un l ght.
ADJUSTING AND BALANCING YOUR CEILING FAN BLADES
Slide the balancing clip on the trailing edge
of any blade, halfway between the holder
and p. Run the fan to check the wobble.
If the wobble persists, repeat with each
blade, no ng which one most reduced
the wobble.
S ck the adhesive-backed balancing weight
on the top center of the blade directly in
line with the balancing clip.Add more weight
if needed to get a smooth-running fan.
Slide the clip in small increments away
from the center of that blade. Move the
clip, operate the fan, then move it again
un l you eliminate as much wobble as
possible.
INSTALL REMOTE CONTROL & FAN BALANCE
STEP 6: