14
G
H
16
17
90
°
Step9
: Peel the back paper of Bumper ( HW14 ) then 1 pcs on
Door Le�, 1 pc, posi�on as shown in the figure.
Slide in the doors and insert the Sliding Top (HW8) pin into the groove.
Posi�on the Sliding Bo�om (HW9) into the groove.
Once all in the right posi�on, release the bu�on on Sliding Roller
Adjust gap of the door, by scroll the bu�on on Sliding Roller (HW9).
Follow the down and up direc�on.
STEP10
: Use Wedge (HW16), Screw M 3.5 x15.5 (HW17) to �ghten
the back of media stand by using screwdriver. Please align the top board
and bo�om board in 90
O
posi�on againt the side board, before securing
the wedges (HW16).
STEP11
: Assembly is complete.
