PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
Step
1:
Install the pipe 1(D) into the base in front side, and
locked it into the base(C) with nuts(HW1) and tooth lock
washer (HW2),fix them tightly with wrench(HW7). Install the
pipe 2(E) into pipe 1(D), then install the pipe 3(G) into pipe 2(E),
lock the pipe 3(G) with screws(HW3) and fix with the allen
key(HW6). Lock pipe 4(I) into pipe 3(G), fix it with phillips
Screws(HW4) and fix with allen key(HW5). Install pipe 5(J) into
pipe 4(I) and lock it with phillips Screws(HW4) and fix with allen
key(HW5). Check the floor lamp and ensure is front side and
upright to the floor.
Step 2:
Install the shade(K) to the socket and lock it with the ring(L).
Step 3:
Install the light bulb(M) into the socket.
2/2
