Step 1
Step 2
Step 3
Step 4
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY
TIGHTENED BEFORE USING CHAIR
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
Insert five Casters (5) into Star Base (4),
push hard until you feel or hear the Caster(5)
snap into place. Insert the LARGE end of
Cylinder Column (3) with into the Star Base
(4) and carefully press downward with
moderate force until it is fully seated.
Attach Control Mechanism (2) to Seat
Assembly (1) with the arrow towards the
front of the chair, using four Washers (7)
and four Screws(6).
FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH
Now insert the small end of Cylinder Column
(3) into Control Mechanism (2) and carefully
press downward with moderate force until it
is fully seated.
