PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
uct.
* Tools required for assembly (included) : Allen key
* Tools required for assembly (not included) : Philip Screw driver
* If you are having difficulty, our friendly Customer Care team is always h
ere to help. Please email [email protected]
Step 3 : Place the table top upside down, then screw the leg frame. Make
sure to place on the smooth and clear surface to avoid the surface
scratch.
Step 4 : Place the pedestal cap on the pedestal.
1. There is no pre-drilled hole underneath
2. Placing Cross Bar onto the pre-drawn
crossing mark then insert the Screw “A”
into the hole found on the cross bar.
3. Screwing all Screws “A” into the
Table Top by ensuring the cross bar is
aligned to the crossing mark.
** Please ignore this hole. This hole is not
meant for assembly.
