2
B
1
11
10
2
x 2
6
7
8
E
7
1
2
STEP9
: Bring the assembled bo�om skirt and insert into Bo�om Board
of the coffee table .Secure with Camlock (HW2) then
�ghten using screwdriver.
STEP10
: Remove plas�c cap from Legs. Insert the bolt of the Leg (LS20B1) into hole of
corner brace as shown in figure. Insert Flange Nut (HW10) first into the hanger bolt
of leg, �ghten all the nuts using provided Wrench (HW11). Ensure that all legs
has been �ghtened, then con�nue with �ghten all screws on the corner brace.
STEP11
: Peel the back paper of Bumper (HW8) then place on
both frame door,posi�on as shown in the figure.
Insert Top Pin Sliding (HW6) and Bo�om Pin Sliding (HW7)
on both end of frame door as specified posi�on in the figure.
STEP12
: Hold the frame door with posi�on of the upper pin shown in
facing upward. Put the frame door by inser�ng it to the upper groove on
Top Board (1), then place the lower part aligned into the groove on
bo�om board (2). Repeat this step for the other door.
Slide the doors to right and le� ensuring the doors has been placed
properly in the provided track.
LS20B1
LS20B1
LS20B1
