Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
PREPARATION
6x
H1
H2
H3
A
B
B
B
B
A
B
B
B
B
The legs and hardware are located under the drawer
STEP2
PLACE THE BEDSIDE (A)
UPSIDE DOWN AS SHOWN.
STEP3
ALIGN THE LEGS (B) WITH
THE POSITION ON THE BOTTOM
OF BEDSIDE (A).
STEP1
OPEN THE ZIPPER ON THE
INSIDE OF THE DRAWER AND
TAKE OUT LEGS AND HADWARE.
STEP4
INSERT ALLEN BOLT (H1)
WITH WASHER (H2) AND TIGHTEN
WITH ALLEN KEY (H3).
STEP5
FLIP THE BEDSIDE
UPSIDE.
PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not a empt to assemble the product.
* Es mated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
contents list and hardware contents list.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
Leg
STEP1
Unwrap the legs & take out legs.
Hardware
Open the hardware pouch & take out hardware.
STEP2
Place the Nightstand upside down on a clean surface.
Align legs on both sides of Nightstand as per side holes
present on either side of Nightstand.
STEP3
Put the washer on the Bolt in the order shown in
picture.
Hw2
STEP4
Insert Allen Bolt (Hw1) with Washer (Hw2)
ghten with Allen Key (Hw3).Don’t over ghten.
Hw1
Hw3
Hw2
Hw1
Hw2
Hw1
Hw3
STEP5
Repeat step 4 for, other side leg, flip the Nightstand upright with help.
B
B
B
B
A
