PREPARATION
STEP3
INSERT THE LEGS AND SCREW INTO THE SEAT
HOLES AND TIGHTEN THE SCREWS BY USING ALLEN KEY.
The legs and hardware are located underneath the Chair in the
zipper compartment.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP1
OPEN THE ZIPPER ON THE UNDERSIDE OF THE
SEAT AND TAKE OUT LEGS AND HARDWARE
STEP2
PUT THE WASHERS ON THE SCREW IN
THE ORDER SHOWN IN THE PICTURE
HW2 HW1 HW3
STEP4
CLOSE THE ZIPPER ON THE UNDERSIDE OF
THE SEAT AND PUT THE CHAIR UPRIGHT.
A
HW2 HW1 HW3
A
HW4
