Installation Guide
–
Safari SS1066HF Page - 8 of 12
17
Position the air cleaner
base template (Item 21) to
the underside of the air
cleaner base, locate the
template over the two air
cleaner base mounting pins
as shown and mark the
required profile.
Use an air body saw to cut
away the marked section of
the air cleaner base and
discard the centre cut
piece.
Use a fine file to smooth
any rough edges in the air
cleaner base part of the cut.
18
Position the air entry duct
(Item 12) over the air
cleaner base and press
down firmly.
With the air entry duct
correctly positioned onto
the air cleaner base, mark
the nine hole positions onto
the air cleaner base.
Drill the marked hole
positions on the air cleaner
base with a 5mm (13/64")
drill.
19
Install the air entry duct
(Item 12) up through the air
cleaner housing mounting
bracket trimmed previously.
Install a 90/110 hose clamp
(Item 11) at the front end
and a 80/100 hose clamp
(Item 10) at the rear end of
the air entry hose (Item 9).
Install the air entry hose to
the snorkel body outlet and
the air entry duct.
Do not tighten the hose
clamps yet.