21
20
Menu Function
1. Press MENU/HOLD button twice during the stop
mode.
(Figure 5-2)
2. Please establish LO SENSE or HI SENSE with
NEXT/BACK Key.
(Figure 5-1, 5-2)
3. Press the Menu/Hold button shortly to select the
changed mode.
4. Press the Menu/Hold button lengthily (for more than 2
seconds) to escape from the selected menu to stop
status.
1. Press the Next button once after pressing the Menu/Hold
button shortly in stop status, and press the Menu/Hold
button shortly.
(Figure 5-3)
2. Establish VOR ON/OFF with NEXT/BACK.
(Figure 5-3, 5-4)
3. Press the Menu/Hold button shortly to select the changed mode.
4. Press the Menu/Hold button lengthily (for more than 2
seconds) to escape from the selected menu to stop status.
Hi SENSE : In a silent circumstance (recommended)
LO SENSE : In a noisy circumstance. Put the Mic close to the source of the sound.
Notes
ƃ
Please adjust the sensitivity according
to the recording circumstances.
ƃ
The factory default is high-sensitive mode.
ƃ
VOR is the function as the source volume is
decreased and the recording is paused
automatically and simultaneously.
ƃ
The factory default is VOR OFF mode.
ƃ
While operating VOR, sound can be broken a little.
ƃ
If you use VOR ON in the state of low sensitivity,
just high sound is recorded.
ƃ
If you record important context, VOR OFF is
recommended.
ƃ
MENU item order: SENSE
ƍ
VOR
ƍ
BACK LIGHT
ƍ
Recorded voice quality
ƍ
Current time
ƍ
SCAN
ƍ
Time setup
ƍ
SENSE.
ƃ
It operates just under Stop Mode.
ƃ
Push the button once.
ƃ
It operates just Under Recorder Mode and does not enter into Menu Mode.
(Figure 5-1)
(Figure 5-2)
(Figure 5-3)
(Figure 5-4)
(Figure 5-5)
(Figure 5-6)
ƃ
This is method to select whether or no you select
"Ppick~" sound for operation of the button.
ƃ
The product is set to Beep On mode when it is
shipped.
1. Press the Next button twice times after pressing the
Menu/Hold button in stop status, and then press the
Menu/Hold button shortly
(Figure 5-5)
.
2. Set Beep On/Off by pressing the Next/Back button
(Figure 5-5, Figure 5-6)
.
3. Press the Menu/Hold button shortly to select the changed mode.
4. Press the Menu/Hold button lengthily (for more than 2
seconds) to escape from the selected menu to stop status.
3
Establishment of Back Light
4
ƃ
It is the method to decide whether to turn on
Back Light or not when you pushing Key.
ƃ
When you buy product first, it will be established
as Back Light ON Mode .
(Figure 5-7)
(Figure 5-8)
Establishment of Mice Recording Sensitivity
1
VOR Function
2
Setup of beep sound
1. Please push MENU/HOLD Key three times for short time under
Stop Mode.
(Figure 5-7)
2. Establish LIGHT ON/OFF with NEXT/BACK Key.
(Figure 5-7, 5-8)
3. If you want to select changed Mode, move to next
Menu through pushing MENU/HOLD Key, push (STOP/DEL)
Key or wait for 10 seconds.
4. If you press any button after you setup the function to "On",
backlight will be on for about 3 seconds.
0722 SF69-00588A-E 2005.7.23 1:11 AM 페이지 20
