Troubleshooting guide
39
Symptom Possible cause Corrective action
"Removab
le Disk" is
not dis-
played
when the
unit is
connected
to the PC.
The PC and the
unit are not con-
nected correctly.
Connect them correctly. (See
page 26.)
Sufficient power is
not being supplied
from the PC.
If a USB hub is being used,
reconnect the unit directly to the
USB port on the PC. If the PC is
equipped with several different
USB ports, try another port.
The supplied CD-
ROM is not
installed properly.
Check the installation. (See
page 23.)
A network drive
has been
assigned.
If a network drive has been
assigned, the drive
letter (the letters used as drive
names) is already
taken, so the Removable Disk
cannot be created.
Change the network drive assign-
ments and
reconnect. Talk to your network
administrator
about reassigning network drives.
Symptom Possible cause Corrective action
The unit
does not
start.
No sound.
Buttons do
not
respond.
"dAtE"±
blinks
when the
power is
turned on.
Battery is not
inserted properly
or is ran out.
Internal memory
error.
Reinsert the battery correctly
or replace with new
alkaline battery. (See page 4.)
Format (initialize) the internal
memory. (See page
14.)
The volume is
turned down too
low.
There is no
recorded files.
Adjust the volume. (See page
5.)
Confirm the recorded files.
(See page 11.)
The hold function
is set.
The PC and the
unit are still con-
nected.
Turn off the function. (See
page 5.)
Disconnect them.
The clock is not
set.
Set the date and time. (See
page 6.)
40
