Spare part illustration and spare part designation
SK RS 9042 - SK 500
plus
10-11
SAF axle identification
2
Repairing the brakes
12-22
Repairing the wheel bearings
Replacing the wheel bearing grease
23-25
E)
Installation instructions
D) Spare part illustrations/spare part designation
C)
Maintenance instructions
Maintenance instructions for SK RS 9042 - SK 500
plus
8
Maintenance schedule for SK RS 9042 - SK 500
plus
9
3
Contents
Page
This manual is intended for the technical workshop personnel responsible for
maintenance and repair.
A) Component
description
4-6
B)
General service instructions for SAF axles and suspension units
7
Adjustment of S-cam brakes with manual slack adjusters
26
Adjustment of HALDEX automatic slack adjusters
27
Adjustment of S-ABA automatic slack adjusters
28
F)
Slack adjuster
G) Track control
29-30
H) Service tools
31-32
I)
Tightening torque in Nm
33
The item numbers indicated are given only for identification and to distinguish between different versions.
Use the part numbers from the valid spare parts documents for identification of spare parts.
SAF axles and suspension units are subject to continuous further development; the data and drawings
contained in the manual may therefore differ from the details given in the operating permit.
The contents of the manual does not constitute the basis for a legal claim.
Reprinting, reproduction or translation in whole or in part is not permitted.
The issue of this publication invalidates all earlier maintenance and repair manuals.
