14
E) Installation instructions
Remove the spring clip from
the groove in the camshaft
and pull the camshaft com-
pletely out of the bearing.
Arrangement and installation
position of the camshaft
bearings, see drawing on
page 13.
Remove the bolts from the compact bearing and replace with a
new bearings (see page 10, item 81 with parts 85.1 - 88.1, and
item 10 with parts 11, 15 and 18).
After installation of th e new
compact bearing, the cams-
haft must rotate freely. Insert
the bolts and fit the nuts.
Tightening torque for the bolts on the compact bearing:
- Brake side 40 Nm
- Slack adjuster side 35 Nm
