4 Inspection procedures
22
en
XL-SA30000RM-en-DE Rev A • 02.2016 • Errors and changes excluded © SAF-HOLLAND
Fig. 34 -
Measuring the brake calliper clearance
3. Tilt the brake calliper in the direction of the black
4. Set the dial gauge to zero.
5. Now tilt the brake calliper in the direction of the
red arrows and read the clearance from the dial
.
Measurement specification:
The bearing bushing must be replaced if the clear-
ance exceeds 2 mm. See chapter
and
A
B
Fig. 35 -
Brake calliper bearing
The floating bearing consists of a soft composite. If a
metallic sound is produced by the floating bearing, it
must be replaced.
LH
RH
A
B
Fig. 36 -
Fixed bearing (A) and floating bearing (B)
A
= fixed bearing
B
= floating bearing