2
XL-AS20067BM-en-US · 2021-02-05 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Contents
Contents Page
Introduction ......................................................................... 2
Warranty .............................................................................. 2
Notes, Cautions, and Warnings ............................................. 2
Section 1 – General Safety Instructions ................................ 3
Section 2 – Welding Standards ............................................. 4
Section 3 – PosiLift AN / AS Component List ......................... 5
Section 4 – PosiLift AN / AS Installation Instructions ............. 6
Section 5 – Air Control System with PosiLift AN / AS
Manual Lift ............................................................ 8
Section 6 – Air Control System with PosiLift AN / AS
Solenoid Lift .............................................................. 9
Introduction
This manual provides the information necessary for the
care, maintenance, inspection, and safe operation of the
PosiLift AN and PosiLift AS Air Lift.
PosiLift AN and PosiLift AS are designed and engineered
to provide a trouble-free service. In the event of a minor
breakdown, such as a loss of pressure in the air springs, drive
CAUTIOUSLY at slow speed to the nearest service facility.
PosiLift AN and PosiLift AS use air drawn from the tractor air
system to pressurize the air springs.
Warranty
Refer to the complete warranty for the country in which
the product will be used. A copy of the written warranty is
included with the product or available on the internet at
www.safholland.com.
Contents Page
Section 7 – Pre-Operational Checklist................................. 10
Section 8 – SwingAlign™ Axle Alignment .......................... 11
Section 9 – Service Repair Kits (SRK) .................................. 12
Section 10 – Hanger Mounted Lift Bracket Replacement ..... 16
Section 11 – Beam Mounted Lift Bracket Replacement ....... 18
Section 12 – PosiLift AN / AS Air Spring Replacement ......... 19
Section 13 – Pivot Connection Rubber Bushing Replacement ...20
Section 14 – Torque Specifications ..................................... 24
Notes, Cautions, and Warnings
Before starting any work on the unit, read and understand all
the safety procedures presented in this manual. This manual
contains the terms “NOTE”, “IMPORTANT”, “CAUTION”, and
“WARNING” followed by important product information.
These terms are defined as follows:
NOTE:
Includes additional information to enable
accurate and easy performance of procedures.
IMPORTANT:
Includes additional information that if
not followed could lead to hindered
product performance.
Used without the safety alert symbol,
indicates a potentially hazardous
situation which, if not avoided, could
result in property damage.
Indicates a potentially hazardous
situation which, if not avoided, could
result in minor or moderate injury.
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury.
